How to install
ATTENTION: Vnish firmware is working only with Antminer S19, S19a, S19a pro, S19j, S19kpro, S19jpro, S19jpro plus, S19pro-a, S19pro, S19pro-a, S19i, S19+, S19 hydro, S19pro hydro, S19pro plus hydro, S19xp Hydro, S19j plus, T19 hydro, T19
There are several options for installing the firmware. The first option is to install using SD card, the second option is to install without the SD card directly to NAND of the miner using the VNISH TOOLKIT
Standard types of control boards: SD slot outside ( Xilinx SD version), SD slot is located inside on the control board ( beagle bone BB version ), only micro usb slot is located outside (Amlogic version), see the file: types of control boards
SD CARD: Download the SD IMAGE , unzip and read manual ( Use SD card to install the firmware (not more than 16gb, FAT 32) Insert the SD card with VNISH FIRMWARE and turn on the asic, if you pull out the SD card the BITMAIN firmware will return. For amlogic control boards you can pull out an SD card or USB flash drive. If you need to update the version of vnish firmware which you are already using on the SD card or in NAND you need to download the firmware WEB SD update file and use upgrade function in the firmware.
NAND INSTALL: Download NAND INSTALL IMAGE for your miner model and type of control board and VNISH TOOLKIT (unzip, read manual how to install).
VNISH S19 SD IMAGE (version 1.2.5 Stable)После перезагрузки майнера с контрольной платой CVitek с прошивкой vnish вернется стоковая прошивка, вам нужно просканировать сеть где находится майнер с помощью phoenix-scanner в фоновом режиме и прошивка Vnish будет восстановлена автоматически
После перезагрузки майнера с контрольной платой CVitek с прошивкой vnish вернется стоковая прошивка, вам нужно просканировать сеть где находится майнер с помощью phoenix-scanner в фоновом режиме и прошивка Vnish будет восстановлена автоматически
Modes vnish S19, T19 firmware
POPULAR MODES VNISH FIRMWARE ANTMINER S19:
Bitman Antminer S19pro/S19j pro – 125 TH/s – 3800 watt (30 watt – TH/s)
Antminer S19pro/S19j pro – 140 TH/s – 4600 watt (33 watt – TH/s)
Antminer S19pro/S19j pro – 170 TH/s – 6200 watt (36 watt – TH/s)
Bitman Antminer S19/S19j – 115 TH/s – 3850 watt (33 watt – TH/s)
Antminer S19/S19j – 125 TH/s – 4600 watt (37 watt – TH/s)
Antminer S19/S19j – 140 TH/s – 6100 watt (43 watt – TH/s)
BitmanAntminer T19 – 85 TH/s – 2700 watt (31 watt – TH/s)
Antminer T19 – 105 TH/s – 3700 watt (35 watt – TH/s
Bitman Antminer T19 – 120 TH/s – 4500 watt (37 watt – TH/s)
Antminer T19 – 128 TH/s – 5100 watt (40 watt – TH/s)
STOCK BITMAIN FIRMWARE ANTMINER S19:
Bitman Antminer S19pro – 110 TH/s – 3300 watt (30 watt – TH/s)
Antminer S19j – 90 TH/s – 3100 watt (34 watt – TH/s)
Antminer T19 – 81 TH/s – 3100 watt (38 watt – TH/s)
version 1.2.5 Stable
📢 New Additions:
- Added support for Antminer S21 (Amlogic), Antminer S21 Hydro, Antminer T21 (Amlogic/Cvitek), Antminer T19 Hydro, Antminer T21(BHB68703), Antminer S19k Pro (Xilinx), Antminer S19k Pro (BHB56903/BHB56903-/BHB56902-)
- Added widget Performance
- Introduced new presets: preset 9250MH for Antminer L7, lower presets for Antminer S19, and new presets for Antminer S19 Hydro, S19Pro Hydro, and S19Pro+ Hydro
- The dashboard now displays Hashboard factory information and Hashboard temperature after overheating
- Added features for preheating chips and voltage adjustment in automatic cooling mode
- Logs are now saved after reboot
- Invalid CRC EEPROMs are ignored
🚦 Changes:
- Now supports the previous format of autotune.json without serial number (1.2.0/1.2.1)
- Reduced the minimum difference between switching temperatures to 5 degrees Celsius
- Recalibrated chip temperature for x21 series
- Updated water temperature checks on Hydro miners
- Adjusted chip temp offset for Hydro miners
- Enhanced autotuning functionality
- Corrected profiles for Antminer S19i and S19 Hydro
- Raised the critical temperature threshold to 120°C
- LEDs now blink faster when activating find miner
- Made minor UI/UX adjustments
- Enhanced miner stability
🐞 Bug Fixes:
- Fixed minimum hashrate check when quick start is enabled
- Fixed cooling down for automatic/manual fan mode
- Resolved false virus detection on Cvitek firmware
- Fixed double compression (diagreport/backup)
- Corrected /docs route
- Fixed memory leaks and firmware hangs on Cvitek
- Resolved configuration loss after power loss
- Improved autotune for Antminer S19i
- Fixed chip detection issue on Antminer S19k Pro
- Resolved double pause issue
- Fixed dashboard hangs with a large number of connections
- Fixed voltage adjustment in immersion and manual cooling mode
- Fixed work with L7 sensors
💻 API Changes:
- Added max_rpm parameter in the fans object on the /summary response
- Added hr_stock to the /summary response
- Introduced new /chains and /factory-info routes on the API